{"title":"Front Splitters \u0026 Front Lips | Maxton Design Tuning","description":"\u003cp\u003eFront splitters and front lips from Maxton Design give the front of the vehicle a lower, sportier appearance and are one of the most effective ways to achieve a more aggressive look. When making your selection, always pay attention to the vehicle model, year of manufacture, facelift or pre-facelift status, equipment line, and bumper variant.\u003c\/p\u003e\u003cp\u003eFitment is particularly important for S-line, M-package, R-line, AMG-line, GTI, RS, M, and performance models. A front lip will only fit properly if it is selected specifically for the installed front bumper and model generation.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFront splitters for Audi, BMW, VW, Mercedes, Skoda, Hyundai, Ford, and Tesla\u003c\/li\u003e\n\n\u003cli\u003eFront lips suitable for standard bumpers, sports packages, and facelifts\u003c\/li\u003e\n\n\u003cli\u003eMaxton Design variants in gloss black, carbon look, or ABS, depending on the product\u003c\/li\u003e\n\n\u003cli\u003eIdeally combinable with side skirts, spoilers, and rear diffusers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eIf you would like to customize both the front and rear, our \u003ca href=\"\/en\/pages\/heckdiffusor-ratgeber\" title=\"Rear Diffuser Buying Guide\"\u003erear diffuser guide\u003c\/a\u003e will assist you in choosing the right combination of front splitter, side skirts, and rear diffuser.\u003c\/p\u003e\u003cp\u003eFor high-quality carbon front lips and complete carbon conversions, you can find additional selection assistance in the \u003ca href=\"\/en\/pages\/maxton-carbon-ratgeber\" title=\"Maxton Carbon Guide\"\u003eMaxton Carbon Guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIf you drive an Audi A4 B9, S4 B9, or RS4 B9, our \u003ca href=\"\/en\/pages\/audi-a4-rs4-b9-tuning-bodykits\" title=\"Audi A4 B9 \u0026amp; RS4 B9 Tuning Guide\"\u003eAudi A4 B9 \u0026amp; RS4 B9 Tuning Guide\u003c\/a\u003e will assist you with the right combination of front splitter, side skirts, and rear diffuser.\u003c\/p\u003e\u003cp\u003eFor Audi A6 C8, S-line, standard bumper, Avant, sedan, and allroad, you can find the appropriate selection assistance in the \u003ca href=\"\/en\/pages\/audi-a6-c8-tuning-bodykits\" title=\"Audi A6 C8 Tuning Guide\"\u003eAudi A6 C8 Tuning Guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eFor Audi RS6 C7 and RS6 C8 Avant, you can find the appropriate selection assistance in the \u003ca href=\"\/en\/pages\/audi-rs6-c7-c8-tuning-bodykits\" title=\"Audi RS6 C7 \u0026amp; C8 Tuning Guide\"\u003eAudi RS6 C7 \u0026amp; C8 Tuning Guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eFor Audi RS3 8V and RS3 8Y, you can find the appropriate selection assistance in the \u003ca href=\"\/en\/pages\/audi-rs3-8v-8y-tuning-bodykits\" title=\"Audi RS3 8V \u0026amp; 8Y Tuning Guide\"\u003eAudi RS3 8V \u0026amp; 8Y Tuning Guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eFor Audi Q8, SQ8, and RSQ8, you can find the appropriate selection assistance in the \u003ca href=\"\/en\/pages\/audi-q8-sq8-rsq8-tuning-bodykits\" title=\"Audi Q8, SQ8 \u0026amp; RSQ8 Tuning Guide\"\u003eAudi Q8, SQ8 \u0026amp; RSQ8 Tuning Guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eFor BMW 3 Series G20 and G21, you can find the appropriate selection assistance in the \u003ca href=\"\/en\/pages\/bmw-3er-g20-g21-tuning-bodykits\" title=\"BMW 3 Series G20 \u0026amp; G21 Tuning Guide\"\u003eBMW 3 Series G20 \u0026amp; G21 Tuning Guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eFor BMW 5 Series G30 and G31, you can find the appropriate selection assistance in the \u003ca href=\"\/en\/pages\/bmw-5er-g30-g31-tuning-bodykits\" title=\"BMW 5 Series G30 \u0026amp; G31 Tuning Guide\"\u003eBMW 5 Series G30 \u0026amp; G31 Tuning Guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eFor Tesla Model 3 and Model Y, you can find the appropriate selection assistance in the \u003ca href=\"\/en\/pages\/tesla-model-3-y-tuning-bodykits\" title=\"Tesla Model 3 \u0026amp; Model Y Tuning Guide\"\u003eTesla Model 3 \u0026amp; Model Y Tuning Guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eFor VW Golf 7, GTI, R, and R-line, you can find the appropriate selection assistance in the \u003ca href=\"\/en\/pages\/vw-golf-7-tuning-bodykits\" title=\"VW Golf 7 Tuning Guide\"\u003eVW Golf 7 Tuning Guide\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eFor Skoda models, especially Octavia RS MK3 and MK4, you can find the appropriate selection assistance in the \u003ca href=\"\/en\/pages\/skoda-tuning-bodykits-ratgeber\" title=\"Skoda Tuning Bodykit Guide\"\u003eSkoda Tuning Bodykit Guide\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"front-lippe-front-splitter-frontansatz-v-1-fur-fiat-500-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.1 for Fiat 500","description":"\u003cp\u003eFront Lip \/ Front Splitter \/ Front Valance V.1 for Fiat 500 by Maxton Design\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFits:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eFiat 500 Standard Pre-Facelift 2007 - 2014\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Fiat 500\u003c\/li\u003e\n\n\u003cli\u003eMounting Kit\u003c\/li\u003e\n\n\u003cli\u003eMounting Instructions\u003c\/li\u003e\n\n\u003cli\u003eParts Certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e Gloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in gloss black, or all items from the Street Pro or Racing collection in black. Installation is done with the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required, please check with your TÜV beforehand if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48542932500812,"sku":"16226","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-1-fiat-500-hatchback-vor-facelift-703_10-min_f69f9e62-2b1f-4f1a-be1d-f195c924f17d.jpg?v=1725290078"},{"product_id":"front-lippe-front-splitter-frontansatz-v-2-fur-fiat-500-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.2 for Fiat 500","description":"\u003cp\u003eFront Lip \/ Front Splitter \/ Front Valance V.2 for Fiat 500 by Maxton Design\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFits:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eFiat 500 Standard Pre-Facelift 2007 - 2014\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Fiat 500\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e Gloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in gloss black, or all items from the Street Pro or Racing collection in black. Installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (Gutachten für das Material).\u003cbr\u003eRegistration according to §21 is required, please check with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48542940365132,"sku":"16227","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-2-fiat-500-hatchback-vor-facelift-7187_8-min.jpg?v=1725290141"},{"product_id":"front-lippe-front-splitter-frontansatz-fur-fiat-500-abarth-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter for Fiat 500 Abarth","description":"\u003cp\u003eFront Lip \/ Front Splitter for Fiat 500 Abarth by Maxton Design\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFits:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eFiat 500 Abarth 2008 - 2012\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Splitter for Fiat 500 Abarth\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e Gloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper by 3-5cm (depending on the model) and improves the vehicle's aerodynamics. We ship the front spoiler well-packaged, ready for installation in gloss black, or all items from the Street Pro or Racing collection in black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your TÜV beforehand if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48542940856652,"sku":"16231","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_splitter-frontansatz-v-2-fiat-500-abarth-mk1-7344_8-min_3f04e13e-f546-4984-8f51-3b003fdb5b5e.png?v=1725290176"},{"product_id":"front-lippe-front-splitter-frontansatz-fur-fiat-500-abarth-facelift-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter for Fiat 500 Abarth Facelift","description":"\u003cp\u003eFront Lip \/ Front Splitter \/ Front Valance for Fiat 500 Abarth Facelift by Maxton Design\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFits:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eFiat 500 Abarth Facelift 2016 -\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Fiat 500 Abarth\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e Gloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in gloss black, or all items from the Street Pro or Racing collection in black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required, please inquire with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48542953079116,"sku":"16238","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_splitter-frontansatz-fiat-500-abarth-mk1-facelift-11621_6-min_07cffdce-151a-42ef-b92f-370ffed83148.png?v=1725290478"},{"product_id":"front-lippe-front-splitter-frontansatz-fur-fiat-500x-sport-mk1-facelift-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter for Fiat 500X Sport MK1 Facelift","description":"\u003ch2\u003eFront Lip \/ Front Splitter \/ Front Valance for Fiat 500X Sport MK1 Facelift by Maxton Design\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003ecompatible with:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eFiat 500X Sport MK1 Facelift 2019 -\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Fiat 500X\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGlossy Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged and ready for installation in glossy black, or all items from the Street Pro or Racing collection in black. Installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your local TÜV office beforehand if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48542956978508,"sku":"22659","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-fiat-500x-sport-mk1-facelift-19301_1-min_ea63c31c-c760-4be5-94b7-28e97360adee.png?v=1725290650"},{"product_id":"front-lippe-front-splitter-frontansatz-v-1-fur-toyota-yaris-xp21-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.1 for Toyota Yaris XP21","description":"\u003cp\u003eFront Lip \/ Front Splitter \/ Front Valance V.1 for Toyota Yaris XP21 by Maxton Design\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFits:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eToyota Yaris XP21 2019 -\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Toyota Yaris\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eAssembly instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in Gloss Black or, for all items from the Street Pro or Racing collection, in black. Installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specifically developed for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material report (report for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your TÜV beforehand to see if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48542957371724,"sku":"16052","price":249.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-1-flaps-toyota-yaris-mk4-16916_2-min_88fdf73b-c03e-4d27-b51d-61cd850d38b7.png?v=1725290683"},{"product_id":"front-lippe-front-splitter-frontansatz-v-3-fur-toyota-yaris-xp21-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.3 for Toyota Yaris XP21","description":"\u003cp\u003eFront Lip \/ Front Splitter \/ Front Valance V.3 for Toyota Yaris XP21 by Maxton Design\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFits:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eToyota Yaris XP21 2019 -\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Toyota Yaris\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in gloss black, or all items from the Street Pro or Racing collection in black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (material report).\u003cbr\u003eRegistration according to §21 required; please inquire with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48542964842828,"sku":"16054","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-3-toyota-yaris-mk4-16924_2-min_1e712ce6-a8f9-4135-bde1-ae024a46087c.png?v=1725290750"},{"product_id":"front-lippe-front-splitter-frontansatz-v-2-fur-toyota-yaris-xp21-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.2 for Toyota Yaris XP21","description":"\u003cp\u003eFront Lip \/ Front Splitter V.2 for Toyota Yaris XP21 by Maxton Design\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFits:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eToyota Yaris XP21 2019 -\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Splitter for Toyota Yaris\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColour:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front splitter well-packaged, ready for installation in gloss black, or all items from the Street Pro or Racing collection in black. Installation is done using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48542966579532,"sku":"16053","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-2-toyota-yaris-mk4-16920_2-min_45e44c8f-233d-4fde-be37-f5b7b351a18d.png?v=1725290787"},{"product_id":"front-lippe-front-splitter-frontansatz-fur-toyota-corolla-e210-limousine-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter for Toyota Corolla E210 Sedan","description":"\u003cp\u003eFront Lip \/ Front Splitter \/ Front Valance for Toyota Corolla E210 Sedan by Maxton Design\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFits:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eToyota Corolla Sedan E210 2019 -\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Toyota Corolla\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e Gloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in Gloss Black or all items from the Street Pro or Racing collection in black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required, please inquire with your TÜV beforehand if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48542980145484,"sku":"16353","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-toyota-corolla-xii-sedan-9610_7-min_af85fc25-c124-4166-a797-0c8c23df6303.png?v=1725290960"},{"product_id":"front-lippe-front-splitter-frontansatz-v-1-fur-toyota-corolla-e210-touring-sports-hatchback-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.1 for Toyota Corolla E210 Touring Sports \/ Hatchback","description":"\u003cp\u003eFront Lip \/ Front Splitter \/ Front Valance V.1 for Toyota Corolla E210 Touring Sports \/ Hatchback by Maxton Design\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFits:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eToyota Corolla Touring Sports E210 2019 -\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003eToyota Corolla Hatchback E210 2019 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Toyota Corolla\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e Gloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the aerodynamics of the vehicle. We ship the front valance well-packaged, ready for installation in gloss black, or all Street Pro or Racing collection items in black. Installation is done using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 required; please inquire with your TÜV beforehand if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48542980931916,"sku":"16354","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-1-toyota-corolla-xii-touring-sports-hatchback-9630_9-min_fe8614e9-6ea3-4115-8361-77666cabab34.png?v=1725290993"},{"product_id":"front-lippe-front-splitter-frontansatz-v-2-fur-toyota-corolla-e210-touring-sports-hatchback-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.2 for Toyota Corolla E210 Touring Sports \/ Hatchback","description":"\u003cp\u003eFront Lip \/ Front Splitter \/ Front Valance V.2 for Toyota Corolla E210 Touring Sports \/ Hatchback by Maxton Design\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFits:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eToyota Corolla Touring Sports E210 2019 -\u003c\/p\u003e\n\u003c\/li\u003e\n\n\u003cli\u003eToyota Corolla Hatchback E210 2019 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Toyota Corolla\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\u003cli\u003ePart certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e Gloss black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in gloss black, or all items from the Street Pro or Racing collection in black. Installation is done using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48542985421132,"sku":"16355","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-2-toyota-corolla-xii-touring-sports-hatchback-9634_9-min_4ee2cb6e-4860-41f4-9d78-6ebf1009a19a.png?v=1725291124"},{"product_id":"front-lippe-front-splitter-frontansatz-v-2-mit-flaps-fur-toyota-gr-yaris-mk4-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.2 with Flaps for Toyota GR Yaris MK4","description":"\u003ch2\u003eFront Lip \/ Front Splitter \/ Front Valance V.2 with flaps for Toyota GR Yaris MK4 by Maxton Design\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003ecompatible with:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eToyota GR Yaris MK4 from 2020 -\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Toyota GR Yaris\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5 cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged and ready for installation in gloss black, or in black for all items in the Street Pro or Racing collection. Installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your local TÜV office beforehand to see if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543018942796,"sku":"22043","price":249.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-2-flaps-toyota-gr-yaris-mk4-11890_2-min_51cb280b-5c27-495d-b398-00e07f3eea1c.png?v=1725291710"},{"product_id":"front-lippe-front-splitter-frontansatz-v-3-mit-flaps-fur-toyota-gr-yaris-mk4-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.3 with Flaps for Toyota GR Yaris MK4","description":"\u003ch2\u003eFront Lip \/ Front Splitter \/ Front Valance V.3 with Flaps for Toyota GR Yaris MK4 by Maxton Design\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003esuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eToyota GR Yaris MK4 from 2020 -\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Toyota GR Yaris\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged and ready for installation in gloss black, or all items from the Street Pro or Racing collection in black. Installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your local TÜV office beforehand to see if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543019499852,"sku":"22044","price":249.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-3-flaps-toyota-gr-yaris-mk4-11894_2-min_97e2db53-bfec-4bd8-b090-84395c9b19fc.png?v=1725291753"},{"product_id":"front-lippe-front-splitter-frontansatz-street-pro-fur-toyota-gr-yaris-mk4-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter Street Pro for Toyota GR Yaris MK4","description":"\u003ch2\u003eFront Lip \/ Front Splitter \/ Front Valance Street Pro for Toyota GR Yaris MK4 by Maxton Design\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003efits:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eToyota GR Yaris MK4 from 2020 -\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Toyota GR Yaris\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBlack\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged and ready for installation in gloss black, or all items in the Street Pro or Racing collection in black. Installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material report (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your local TÜV station beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543019991372,"sku":"22045","price":169.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_rennen-haltbarkeit-splitter-toyota-gr-yaris-mk4-11905_1-min_2ff72b10-ac84-4627-bb52-2c851c9e3d56.png?v=1725291787"},{"product_id":"front-lippe-front-splitter-frontansatz-street-pro-mit-flaps-fur-toyota-gr-yaris-mk4-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter Street Pro with Flaps for Toyota GR Yaris MK4","description":"\u003ch2\u003eFront Lip \/ Front Splitter \/ Street Pro Front Valance with Flaps for Toyota GR Yaris MK4 by Maxton Design\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003esuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eToyota GR Yaris MK4 from 2020 -\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Toyota GR Yaris\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBlack\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged and ready for installation in gloss black, or for all Street Pro or Racing collection items, in black. Installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product is certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your local TÜV office beforehand to see if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543020843340,"sku":"22046","price":228.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_rennen-haltbarkeit-splitter-flaps-toyota-gr-yaris-mk4-11910_1-min_049e1307-8969-47fe-aada-635efde7e972.png?v=1725291819"},{"product_id":"front-lippe-front-splitter-frontansatz-v-1-fur-toyota-gr86-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.1 for Toyota GR86","description":"\u003ch2\u003eFront Lip \/ Front Splitter \/ Front Valance V.1 for Toyota GR86 by Maxton Design\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003efits:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eToyota GR86 MK1 2021 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Toyota GR86\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged and ready for installation in Gloss Black, or all items in the Street Pro or Racing collection in black. Installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product is certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your local TÜV office beforehand if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543031198028,"sku":"22963","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-1-toyota-gr86-mk1-19621_1-min_2309bdc7-f6b0-4bc2-bf07-bce3adf9bc15.jpg?v=1725292131"},{"product_id":"front-lippe-front-splitter-frontansatz-v-1-mit-flaps-fur-toyota-gr86-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.1 with Flaps for Toyota GR86","description":"\u003ch2\u003eFront Lip \/ Front Splitter \/ Front Valance V.1 with flaps for Toyota GR86 by Maxton Design\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003efits:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eToyota GR86 MK1 2021 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Toyota GR86\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the aerodynamics of the vehicle. We ship the front valance well-packaged and ready for installation in Gloss Black, or all items in the Street Pro or Racing collection in black. Installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your local TÜV office beforehand to see if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543032410444,"sku":"22964","price":249.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-1-flaps-toyota-gr86-mk1-19622_1-min.jpg?v=1725292165"},{"product_id":"front-lippe-front-splitter-frontansatz-v-2-fur-toyota-gr86-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.2 for Toyota GR86","description":"\u003ch2\u003eFront Lip \/ Front Splitter \/ Front Valance V.2 for Toyota GR86 by Maxton Design\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003efits:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eToyota GR86 MK1 2021 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Toyota GR86\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black \/ Red\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged and ready for installation in gloss black, or all items in the Street Pro or Racing collection in black. Installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material report (expert opinion for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your local TÜV office beforehand to see if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543033098572,"sku":"22965","price":324.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-2-toyota-gr86-mk1-19623_6-min_deaa087d-73d2-4153-931b-b565136c2999.jpg?v=1725292195"},{"product_id":"front-lippe-front-splitter-frontansatz-v-3-fur-toyota-gr86-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.3 for Toyota GR86","description":"\u003ch2\u003eFront Lip \/ Front Splitter \/ Front Valance V.3 for Toyota GR86 by Maxton Design\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003efits:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eToyota GR86 MK1 2021 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Toyota GR86\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting manual\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5 cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged and ready for assembly in gloss black, or all items from the Street Pro or Racing collection in black. Installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your local TÜV office beforehand to see if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543038734668,"sku":"22966","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-3-toyota-gr86-mk1-19624_1-min_558e19da-6bcb-4e3c-bbd4-69a16c2f1d11.jpg?v=1725292238"},{"product_id":"front-lippe-front-splitter-frontansatz-street-pro-v-1-fur-toyota-gr86-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter Street Pro V.1 for Toyota GR86","description":"\u003ch2\u003eFront Lip \/ Front Splitter \/ Front Valance Street Pro V.1 for Toyota GR86 by Maxton Design\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003ecompatible with:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eToyota GR86 MK1 2021 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Toyota GR86\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBlack\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5 cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged and ready for installation in gloss black, or for all items in the Street Pro or Racing collection, in black. Installation is carried out on the vehicle using the supplied screws.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specifically produced for use in the automotive industry and is used for the manufacturing of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material report (expert report for the material).\u003cbr\u003eRegistration according to §21 (German road traffic licensing regulations) is required; please check with your local inspection authority beforehand to see if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543044501836,"sku":"23020","price":169.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_street-pro-splitter-v-1-toyota-gr86-mk1-19637_1-min_8c39be88-bc8b-4668-a5eb-d99cc820bb1b.jpg?v=1725292588"},{"product_id":"front-lippe-front-splitter-frontansatz-street-pro-v-1-mit-flaps-fur-toyota-gr86-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter Street Pro V.1 with Flaps for Toyota GR86","description":"\u003ch2\u003eFront Lip \/ Front Splitter \/ Front Valance Street Pro V.1 with Flaps for Toyota GR86 by Maxton Design\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003ecompatible with:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eToyota GR86 MK1 2021 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Toyota GR86\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBlack\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged and ready for installation in gloss black, or all items from the Street Pro or Racing collection in black. Installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 required; please check with your local TÜV office beforehand to see if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543045288268,"sku":"23021","price":228.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_street-pro-splitter-flaps-v-1-flaps-toyota-gr86-mk1-19640_1-min_4357a85b-5cef-4ca5-a668-7d1055a635c2.jpg?v=1725292619"},{"product_id":"front-lippe-front-splitter-frontansatz-street-pro-v-2-fur-toyota-gr86-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter Street Pro V.2 for Toyota GR86","description":"\u003ch2\u003eFront Lip \/ Front Splitter \/ Front Valance Street Pro V.2 for Toyota GR86 by Maxton Design\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003ecompatible with:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eToyota GR86 MK1 2021 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Lip \/ Front Valance for Toyota GR86\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBlack\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged and ready for installation in gloss black, or for all items in the Street Pro or Racing collection, in black. The installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your local TÜV office beforehand to see if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543045517644,"sku":"23022","price":169.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_street-pro-splitter-v-2-toyota-gr86-mk1-19664_1-min_46dbf89a-daea-4f4f-a5f9-de08b0f8d60d.jpg?v=1725292652"},{"product_id":"front-lippe-front-splitter-frontansatz-v-3-fur-toyota-supra-mk5-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.3 for Toyota Supra MK5","description":"\u003ch4\u003eHigh-quality, aesthetically pleasing, and perfectly fitting Front Lip \/ Front Splitter \/ Front Valance V.3 for Toyota Supra MK5 from Maxton Design\u003c\/h4\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eToyota Supra A90 2019 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance V.3 for Toyota Supra MK5\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGlossy red\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in glossy red. Installation is done using the provided screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please inquire with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543054496076,"sku":"11385","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_splitter-frontansatz-v-3-toyota-supra-mk5-8885_6_512750f0-2b3e-4143-b4aa-826481eb5288.png?v=1725293005"},{"product_id":"front-lippe-front-splitter-frontansatz-v-2-fur-toyota-supra-mk5-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.2 for Toyota Supra MK5","description":"\u003ch4\u003eHigh-quality, aesthetically pleasing, and precisely fitting Front Lip \/ Front Splitter \/ Front Valance V.2 for Toyota Supra MK5 by Maxton Design\u003c\/h4\u003e\n\u003cp\u003esuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eToyota Supra A90 2019 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance V.2 for Toyota Supra MK5\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eInstallation manual\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGlossy black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in glossy black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543054692684,"sku":"11386","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_splitter-frontansatz-v-2-toyota-supra-mk5-8876_6_8de122ec-3322-4ef3-a0dd-4f59547ba3a2.png?v=1725293055"},{"product_id":"front-lippe-front-splitter-frontansatz-v-1-fur-toyota-gr-yaris-mk4-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.1 for Toyota GR Yaris MK4","description":"\u003ch4\u003eHigh-quality, aesthetically pleasing and perfectly fitting Front Lip \/ Front Splitter \/ Front Apron V.1 for Toyota GR Yaris MK4 by Maxton Design\u003c\/h4\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eToyota GR Yaris MK4 2020 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Apron V.1 for Toyota GR Yaris MK4\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColour:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front apron well-packaged, ready for installation, in gloss black. Installation is done with the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 required, please check with your TÜV beforehand if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543058035020,"sku":"11392","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-1-toyota-gr-yaris-mk4-11874_2_f7796a23-4fcd-4ddb-bab2-e62b844b9ecd.png?v=1725293361"},{"product_id":"front-lippe-front-splitter-frontansatz-v-4-fur-toyota-gt86-facelift-zn6-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.4 for Toyota GT86 Facelift ZN6","description":"\u003ch4\u003eFront Lip \/ Front Splitter \/ Front Valance V.4 for Toyota GT86 Facelift ZN6 by Maxton Design\u003c\/h4\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eToyota GT86 Facelift ZN6 2017 - \u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for Toyota GT86\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for mounting in gloss black. Installation is done using the provided screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please inquire with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543060099404,"sku":"13974","price":324.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_splitter-frontansatz-v-4-toyota-gt86-facelift-6531_7_cf8d6e43-141c-445e-9850-27a499e6535b.png?v=1725293593"},{"product_id":"front-lippe-front-splitter-frontansatz-v-3-fur-toyota-gt86-facelift-zn6-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.3 for Toyota GT86 Facelift ZN6","description":"\u003ch4\u003eFront Lip \/ Front Splitter \/ Front Valance V.3 for Toyota GT86 Facelift ZN6 by Maxton Design\u003c\/h4\u003e\n\u003cp\u003esuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eToyota GT86 Facelift ZN6 2017 - \u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for Toyota GT86\u003c\/li\u003e\n\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the aerodynamics of the vehicle. We ship the front valance well-packaged, ready for installation in gloss black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (material report).\u003cbr\u003eRegistration according to §21 required, please inquire with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543060263244,"sku":"13975","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_splitter-frontansatz-v-3-toyota-gt86-facelift-6527_7_77655b5b-132b-4d67-b5ae-2b44afdcc91f.png?v=1725293625"},{"product_id":"front-lippe-front-splitter-frontansatz-v-2-fur-toyota-gt86-facelift-zn6-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.2 for Toyota GT86 Facelift ZN6","description":"\u003ch4\u003eFront Lip \/ Front Splitter \/ Front Valance V.2 for Toyota GT86 Facelift ZN6 by Maxton Design\u003c\/h4\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eToyota GT86 Facelift ZN6 2017 - \u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for Toyota GT86\u003c\/li\u003e\n\n\u003cli\u003eInstallation manual\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in gloss black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required, please inquire with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543060918604,"sku":"13976","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_splitter-frontansatz-v-2-toyota-gt86-facelift-6524_5_b6a719d8-0c41-4045-8d80-acbdbc0776ae.png?v=1725293659"},{"product_id":"front-lippe-front-splitter-frontansatz-v-1-fur-toyota-gt86-facelift-zn6-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.1 for Toyota GT86 Facelift ZN6","description":"\u003ch4\u003eFront Lip \/ Front Splitter \/ Front Valance V.1 for Toyota GT86 Facelift ZN6 by Maxton Design\u003c\/h4\u003e\n\u003cp\u003esuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eToyota GT86 Facelift ZN6 2017 - \u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for Toyota GT86\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColour:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the aerodynamics of the vehicle. We ship the front valance well-packaged, ready for installation in gloss black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required, please check with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543061639500,"sku":"13977","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_splitter-frontansatz-v-1-toyota-gt86-facelift-6515_3_668f1470-2492-46b5-b0af-e86d8beb7603.png?v=1725293693"},{"product_id":"front-lippe-front-splitter-frontansatz-fur-toyota-corolla-gr-sport-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter for Toyota Corolla GR Sport","description":"\u003ch4\u003eFront Lip \/ Front Splitter for Toyota Corolla GR Sport by Maxton Design\u003c\/h4\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eToyota Corolla GR Sport 2019 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter for Toyota Corolla GR Sport\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front splitter well-packaged, ready for mounting in gloss black. Installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material report (report for the material).\u003cbr\u003eRegistration according to §21 is required; please inquire with your TÜV beforehand about the possibility.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543063966028,"sku":"14214","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-toyota-corolla-gr-sport-hatchback-xii-15408_2_3153fb48-ebb4-400e-9ad4-f019ad6cec66.png?v=1725293904"},{"product_id":"front-lippe-front-splitter-frontansatz-mit-flaps-fur-toyota-corolla-gr-sport-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter with Flaps for Toyota Corolla GR Sport","description":"\u003ch4\u003eFront Lip \/ Front Splitter \/ Front Valance with Flaps for Toyota Corolla GR Sport by Maxton Design\u003c\/h4\u003e\n\u003cp\u003esuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eToyota Corolla GR Sport 2019 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for Toyota Corolla GR Sport\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColour:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in gloss black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (material report).\u003cbr\u003eRegistration according to §21 is required, please check with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543067046220,"sku":"14215","price":204.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-flaps-v-1-toyota-corolla-gr-sport-hatchback-xii-15420_2_38dd8336-347e-4554-b888-da05183164b7.png?v=1725293971"},{"product_id":"front-lippe-front-splitter-frontansatz-v-1-fur-bmw-m3-f80-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.1 for BMW M3 F80","description":"\u003cp\u003eFront lip \/ front splitter \/ front valance V.1 for BMW M3 F80 by Maxton Design\u003c\/p\u003e\n\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW M3 F80 2014-\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design front splitter \/ front valance V.1 for BMW M3 F80\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5 cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged and ready for installation in gloss black. Installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration pursuant to §21 is required; please check with your local TÜV office beforehand to see if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543073829196,"sku":"10565","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_Front-Diffusor-BMW-M3-F80-7665_3.jpg?v=1761268252"},{"product_id":"front-lippe-front-splitter-frontansatz-fur-bmw-m4-f82-m-performance-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter for BMW M4 F82 M-performance","description":"\u003ch4\u003eHigh-quality, elegant and precisely fitting Front Lip \/ Front Splitter \/ Front Valance for BMW M4 F82 M-performance from Maxton Design\u003c\/h4\u003e\n\u003cp\u003esuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW M4 F82 M-performance 2014-\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for BMW M4 F82 M-performance\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eAssembly instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front spoiler well packaged, ready for assembly in gloss black. Installation is carried out with the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required, please check with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543074976076,"sku":"10569","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pl_splitter-frontansatz-bmw-m4-f82-m-performance-8962_8_gg2_be8b071d-d2bc-46cb-807f-0b75b24a4026.jpg?v=1725294234"},{"product_id":"front-lippe-front-splitter-frontansatz-fur-bmw-1er-f40-m135i-m-paket-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter for BMW 1 Series F40 M135i M Package","description":"\u003ch4\u003eHigh-quality, elegantly designed, and perfectly fitting Front Lip \/ Front Splitter for BMW 1 Series F40 M135i M-Package by Maxton Design\u003c\/h4\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 1 Series F40 M135i M-Package 2019 -\u003c\/li\u003e\n\n\u003cli\u003eOnly suitable for M135i!\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter for BMW 1 Series F40 M135i M-Package\u003c\/li\u003e\n\n\u003cli\u003eMounting Kit\u003c\/li\u003e\n\n\u003cli\u003eInstallation Instructions\u003c\/li\u003e\n\n\u003cli\u003eParts Certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the aerodynamics of the vehicle. We ship the front splitter well-packaged, ready for installation in gloss black. Installation is done using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specifically manufactured for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please inquire with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543077794124,"sku":"10571","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pl_front-diffusor-bmw-1-f40-m-pack-m135i-9180_4_gg2_95e30297-d907-4524-ba71-a8bbf162fa15.jpg?v=1725294251"},{"product_id":"front-lippe-front-splitter-frontansatz-v-2-fur-bmw-1er-f40-m135i-m-paket-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.2 for BMW 1 Series F40 M135i M-Package","description":"\u003ch4\u003eHigh-quality, stylish, and perfectly fitting Front Lip \/ Front Splitter \/ Front Valance V.2 for BMW 1 Series F40 M135i M-Package by Maxton Design\u003c\/h4\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 1 Series F40 M135i M-Package 2019 -\u003c\/li\u003e\n\n\u003cli\u003eOnly suitable for M135i!\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance V.2 for BMW 1 Series F40 M135i M-Package\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the aerodynamics of the vehicle. We ship the front valance well-packaged, ready for installation in gloss black. Installation is done using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material report (report for the material).\u003cbr\u003eRegistration according to §21 required, please check with your TÜV beforehand if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543078351180,"sku":"10572","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pl_front-diffusor-v-2-bmw-1-f40-m-pack-m135i-9183_4_gg2_3934c7ed-5ef5-4e45-a434-9b2dfe3b6958.jpg?v=1725294271"},{"product_id":"front-lippe-front-splitter-frontansatz-v-3-fur-bmw-1er-f40-m135i-m-paket-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.3 for BMW 1 Series F40 M135i M-Package","description":"\u003ch4\u003eHigh-quality, aesthetically pleasing, and precisely fitting Front Lip \/ Front Splitter \/ Front Valance V.3 for BMW 1 Series F40 M135i M-Package by Maxton Design\u003c\/h4\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 1 Series F40 M135i M-Package 2019 -\u003c\/li\u003e\n\n\u003cli\u003eOnly suitable for M135i!\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance V.3 for BMW 1 Series F40 M135i M-Package\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in gloss black. Installation is done with the included screws to the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 required, please check with your TÜV beforehand if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543078613324,"sku":"10573","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pl_front-diffusor-v-3-bmw-1-f40-m-pack-m135i-9182_4_gg2_37461595-4e24-42e8-87c0-986ea90323ec.jpg?v=1725294289"},{"product_id":"front-lippe-front-splitter-frontansatz-v-4-fur-bmw-1er-f40-m135i-m-paket-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.4 for BMW 1 Series F40 M135i M-Package","description":"\u003ch4\u003eHigh-quality, aesthetically pleasing and precisely fitting front lip \/ front splitter \/ front valance V.4 for BMW 1 Series F40 M135i M-Package by Maxton Design\u003c\/h4\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 1 Series F40 M135i M-Package 2019 -\u003c\/li\u003e\n\n\u003cli\u003eOnly suitable for M135i!\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance V.4 for BMW 1 Series F40 M135i M-Package\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGlossy Red\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the aerodynamics of the vehicle. We ship the front valance well-packaged, ready for installation in glossy red. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required, please check with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543079235916,"sku":"10574","price":239.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pl_front-diffusor-v-4-bmw-1-f40-m-pack-m135i-9211_7_gg2_734eaef9-058f-4e5d-9412-2ef871698f0c.jpg?v=1725294311"},{"product_id":"front-lippe-front-splitter-frontansatz-v-2-fur-bmw-x7-m-g07-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.2 for BMW X7 M-Package G07","description":"\u003ch4\u003eFront Lip \/ Front Splitter \/ Front Valance V.2 for BMW X7 M-Package G07 by Maxton Design\u003c\/h4\u003e\n\u003cp\u003esuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW X7 M-Package G07 2018 -2022\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for BMW X7 M-Package\u003c\/li\u003e\n\n\u003cli\u003eInstallation manual\u003c\/li\u003e\n\n\u003cli\u003ePart certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in gloss black. Installation is done using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (material certificate).\u003cbr\u003eRegistration according to §21 required, please inquire with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543080415564,"sku":"14643","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-2-bmw-x7-m-g07-12477_2-min_f220dafb-f3c7-4d0f-b8be-7da66f02fca5.png?v=1725294354"},{"product_id":"front-lippe-front-splitter-frontansatz-v-1-fur-bmw-x7-m-g07-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.1 for BMW X7 M-Sport G07","description":"\u003ch4\u003eFront Lip \/ Front Splitter \/ Front Valance V.1 for BMW X7 M-Package G07 by Maxton Design\u003c\/h4\u003e\n\u003cp\u003esuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW X7 M-Package G07 2018 - 2022\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for BMW X7 M-Package\u003c\/li\u003e\n\n\u003cli\u003eMounting instruction\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well packaged, ready for installation in gloss black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 required, please check with your TÜV beforehand whether it is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543080808780,"sku":"14644","price":214.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-1-bmw-x7-m-g07-12473_3-min_364e6362-5c77-4f01-8188-2448f95e549c.png?v=1725294382"},{"product_id":"front-lippe-front-splitter-frontansatz-fur-bmw-x4-f26-m-paket-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter for BMW X4 F26 M-Package","description":"\u003ch4\u003eFront Lip \/ Front Splitter \/ Front Valance for BMW X4 F26 M-Package by Maxton Design\u003c\/h4\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW X4 F26 M-Package 2014\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for BMW X4\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in gloss black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specifically developed for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (material expertise).\u003cbr\u003eRegistration according to §21 is required, please inquire with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543083233612,"sku":"14649","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_frontdiffusor-bmw-x4-m-pack-2947_1-min_9331b1dc-e144-44bb-a317-eef7caa334e2.jpg?v=1725294543"},{"product_id":"front-lippe-front-splitter-frontansatz-fur-bmw-x3-f25-m-paket-facelift-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter for BMW X3 F25 M-Package Facelift","description":"\u003ch4\u003eFront Lip \/ Front Splitter \/ Front Valance for BMW X3 F25 M-Package Facelift by Maxton Design\u003c\/h4\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW X3 F25 M-Package Facelift 2014 - 2017\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for BMW X4\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the aerodynamics of the vehicle. We ship the front valance well-packaged, ready for installation in gloss black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required, please check with your TÜV in advance if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543084642636,"sku":"14652","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_splitter-frontansatz-bmw-x3-f25-m-pack-facelift-8509_13-min_ca02015b-b9a0-481c-acb5-92522bf6eb91.png?v=1725294657"},{"product_id":"front-lippe-front-splitter-frontansatz-v-2-fur-bmw-m8-grand-coupe-f93-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.2 for BMW M8 Gran Coupe F93","description":"\u003ch4\u003eFront Lip \/ Front Splitter \/ Front Valance V.2 for BMW M8 Grand Coupe F93 by Maxton Design\u003c\/h4\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW M8 Grand Coupe F93 2019 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for BMW M8\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in gloss black. Installation is done using the screws provided with the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543091851596,"sku":"14663","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-2-bmw-m8-gran-coupe-f93-12796_2-min_7e84e15d-ff2e-496c-b8f6-e868b088c18d.png?v=1725294963"},{"product_id":"front-lippe-front-splitter-frontansatz-v-1-mit-flaps-fur-bmw-m8-grand-coupe-f93-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.1 with Flaps for BMW M8 Grand Coupe F93","description":"\u003ch4\u003eFront Lip \/ Front Splitter \/ Front Apron V.1 with Flaps for BMW M8 Grand Coupe F93 by Maxton Design\u003c\/h4\u003e\n\u003cp\u003esuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW M8 Grand Coupe F93 2019 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Apron for BMW M8\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColour:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front apron well packaged, ready for assembly in gloss black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required, please inquire with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543092408652,"sku":"14662","price":204.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-flaps-v-1-bmw-m8-gran-coupe-f93-12792_2-min_7b8b1c88-52d4-4b1c-a976-cf830bc6ac1c.png?v=1725294989"},{"product_id":"front-lippe-front-splitter-frontansatz-v-3-fur-bmw-m8-grand-coupe-f93-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.3 for BMW M8 Gran Coupe F93","description":"\u003ch4\u003eFront Lip \/ Front Splitter \/ Front Valance V.3 for BMW M8 Grand Coupe F93 by Maxton Design\u003c\/h4\u003e\n\u003cp\u003esuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW M8 Grand Coupe F93 2019 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for BMW M8\u003c\/li\u003e\n\n\u003cli\u003eInstallation manual\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in gloss black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material report (material certificate).\u003cbr\u003eRegistration according to §21 is required; please inquire with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543093424460,"sku":"14664","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-3-bmw-m8-gran-coupe-f93-12800_6-min_c65e879b-1645-4ec7-b2c3-1bbf7f7e87ec.png?v=1725295015"},{"product_id":"front-lippe-front-splitter-frontansatz-sport-fur-bmw-1-f20-f21-m-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter Sport for BMW 1 F20\/F21 M","description":"\u003ch4\u003eFront Lip \/ Front Splitter \/ Front Valance Sport for BMW 1 F20\/F21 M by Maxton Design\u003c\/h4\u003e\n\u003cp\u003esuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 1 F20\/F21 M 2011 - 2015\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for BMW 1 F\u003c\/li\u003e\n\n\u003cli\u003eMounting instructions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBlack\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the aerodynamics of the vehicle. We ship the front valance well-packaged, ready for mounting in high-gloss black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material report (report for the material).\u003cbr\u003eRegistration according to §21 required, please inquire with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543102173516,"sku":"14696","price":169.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-sport-diffusor-bmw-1-f20-f21-m-power-vor-facelift-1839_1-min.jpg?v=1725295270"},{"product_id":"front-lippe-front-splitter-frontansatz-fur-bmw-1-f20-f21-m-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter for BMW 1 F20\/F21 M Facelift","description":"\u003ch4\u003eFront Lip \/ Front Splitter \/ Front Valance for BMW 1 F20\/F21 M by Maxton Design\u003c\/h4\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 1 F20\/F21 M Facelift 2015 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for BMW 1 F\u003c\/li\u003e\n\n\u003cli\u003eInstallation manual\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation, in gloss black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your TÜV beforehand if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543102566732,"sku":"14697","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_frontdiffusor-bmw-1-f20-f21-m-power-vor-facelift-2900_6-min_e5fcb759-1789-454d-b1da-9bbe95cce05b.png?v=1725295304"},{"product_id":"front-lippe-front-splitter-frontansatz-v-1-fur-bmw-1-f20-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.1 for BMW 1 F20","description":"\u003ch4\u003eFront Lip \/ Front Splitter \/ Front Valance V.1 for BMW 1 F20 by Maxton Design\u003c\/h4\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 1 F20 2011 - 2015\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for BMW 1 F20\u003c\/li\u003e\n\n\u003cli\u003eInstallation manual\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in gloss black. Installation is done with the included screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material report (report for the material).\u003cbr\u003eRegistration according to §21 required, please inquire with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543104532812,"sku":"14698","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-1-bmw-1-f20-14482_2-min_513dcfab-18ae-4749-9ce5-466b16516368.png?v=1725295336"},{"product_id":"front-lippe-front-splitter-frontansatz-v-2-fur-bmw-1-f20-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.2 for BMW 1 F20","description":"\u003ch4\u003eFront Lip \/ Front Splitter \/ Front Valance V.2 for BMW 1 F20 by Maxton Design\u003c\/h4\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW 1 F20 2011 - 2015\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for BMW 1 F20\u003c\/li\u003e\n\n\u003cli\u003eInstallation manual\u003c\/li\u003e\n\n\u003cli\u003ePart certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in Gloss Black. Installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your TÜV beforehand whether this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543106138444,"sku":"14699","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-2-bmw-1-f20-14486_2-min_b0d78016-d179-4bc9-9217-6148911bedcf.png?v=1725295365"},{"product_id":"front-lippe-front-splitter-frontansatz-v-1-fur-bmw-x4-g02-facelift-m-paket-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.1 for BMW X4 G02 Facelift M-Package","description":"\u003cp\u003eFront Lip \/ Front Splitter \/ Front Valance V.1 for BMW X4 G02 Facelift M-Package by Maxton Design\u003c\/p\u003e\n\n\u003cp\u003esuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW X4 G02 Facelift M-Package 2021 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for BMW X4 G02 Facelift M-Package\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\n\u003cli\u003eParts certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged and ready for installation in Gloss Black. Installation is carried out using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially manufactured for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material certificate (certificate for the material).\u003cbr\u003eRegistration according to §21 is required; please check with your local TÜV office beforehand if this is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543111053644,"sku":"14728","price":249.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-1-bmw-x4-m-pack-g02-facelift-16163_2-min_a9648649-4f24-4da0-9bfb-9c807dee11c1.png?v=1725295593"},{"product_id":"front-lippe-front-splitter-frontansatz-v-2-fur-bmw-x4-g02-facelift-m-paket-von-maxton-design","title":"Maxton Design Front Lip \/ Front Splitter V.2 for BMW X4 G02 Facelift M-Package","description":"\u003cp\u003eFront Lip \/ Front Splitter \/ Front Valance V.2 for BMW X4 G02 Facelift M-Package by Maxton Design\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFits:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBMW X4 G02 Facelift M-Package 2021 -\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eScope of delivery:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMaxton Design Front Splitter \/ Front Valance for BMW X4 G02 Facelift M-Package\u003c\/li\u003e\n\n\u003cli\u003eMounting kit\u003c\/li\u003e\n\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\n\u003cli\u003ePart certificate\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eColor:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss Black\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe front splitter visually lowers the front bumper (depending on the model) by 3-5cm and improves the vehicle's aerodynamics. We ship the front valance well-packaged, ready for installation in gloss black. Installation is done using the supplied screws on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe product is made of ABS plastic and is characterized by increased strength and flexibility. ABS material was specially developed for use in the automotive industry and is used for the production of bumpers and other body parts.\u003c\/p\u003e\n\u003cp\u003eThis product has been certified with a TÜV material report (report for the material).\u003cbr\u003eRegistration according to §21 is required, please inquire with your TÜV beforehand whether it is possible.\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":48543111807308,"sku":"14729","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0839\/3726\/3948\/files\/ger_pm_front-diffusor-v-2-bmw-x4-m-pack-g02-facelift-16167_2-min_7f001d9c-56f5-407f-8f5d-e881ac77a2c7.png?v=1725295628"}],"url":"https:\/\/www.bodykit-shop.at\/en\/collections\/frontsplitter.oembed?page=62","provider":"Bodykit-Shop AT","version":"1.0","type":"link"}